Construction Shutter Ply for Concrete Formwork

  • Construction Shutter Ply for Concrete Formwork
  • Construction Shutter Ply for Concrete Formwork
  • shandong
  • CE, ISO
  • 1
  • $8.10-$9.30/ Piece
  • T/T,MoneyGram
Send Message
More Product Details

Product Details:

Product Name

plywood formwork for concrete

Size

1220x2440mm, 1250x2500mm, etc.

Thickness

From 6mm to 35mm,

normally 6mm 9mm 12mm 15mm 18mm 21mm

Thickness Tolerance

Depends on clients exact requirements

Face/Back

Dynea Film, Domestic Film, etc.

Core

Finger Joint Core, Poplar Core, Combi Core, Hardwood Core, etc.

Glue

WBP Glue, water boiling resistant from 12 to 72 hours

Grade

One Time Hot Press, Two Times Hot Press, Form 17, etc.

Moisture Content

8% - 10%

Loading Quantity

8 Pallets/20GP, 18 Pallets/40HQ

Packing Way

Packed with wooden pallet, strengthened with steel belt 4x8x1

Advantages:
1.Light Weight: We choose the high grade poplar as the basic material, they are very light, so Nijia Plywood Formwork is convenient for transporting, and only one person could delivery single formwork by hand.
2. Easy To Cut: the plywood is easy to cut, so according to the construction, the formwork could be cut into the required size.
3. Re-used: Nijia Plywood Formwork could be used 8-10 times.
4.Multi Using: Nijia Plywood Formwork could be used for wall, slab, column, beam and bridge concrete pouring etc..
5. No Deformation:Nijia Plywood Formwork is also whole but not deformation and chipping after 72 hours cooking in boiling water.

Formwork - Designing Buildings Wiki

Jan 7, 2020 - A special grade of plywood is necessary for shuttering, and it must be ... When selecting formwork, the type of concrete and temperature of the 

Formwork plywood - boards | ULMA Construction

Multi-purpose plywood combinable with ULMA formwork systems and working platforms. It covers any kind of application with good quality concrete finish

Formwork - Wikipedia

Formwork is temporary or permanent molds into which concrete or similar materials are poured. ... The formwork is built on site out of timber and plywood or moisture-resistant particleboard. It is easy to produce but time-consuming for larger 

Specifying the right plywood for concrete formwork

Dec 13, 2017 - Concrete formwork may represent close to half the cost of a concrete structure. For cost-effective building, contractors select forming panels that 

Different Materials Used for Formwork - Advantages and

Thin plywood sheets cannot sustain the weight of concrete they may bow out if proper thickness is not provided. Fig 2 : Plywood Formwork. 3. Steel as Formwork 

Phenolic formwork plywood | ULMA Construction

It enables more repeated uses than conventional plywood and offers excellent fair-faced concrete finish. Tough plywood with smooth surface most suitable for 

Plywood for concrete formwork - Metsä Wood

Metsä Wood plywood panels have been widely and successfully used for several different concrete casting projects. There is a suitable shuttering plywood 

Formwork and finishes for cast in situ concrete - The Concrete

May 27, 2016 - Bent ply. Steel sheets. • 2D curved shapes by casting against bent formwork. • Braced to support weight of concrete. Plastic lined cardboard

Temporary Structures Formwork for Concrete Formwork for

associated with concrete formwork design and construction for walls (slab formwork design will be ... describe basic properties of wood and plywood;. • explain 

Types of Formwork (Shuttering) for Concrete Construction and

Jump to Plywood Formwork - Formwork can be made out of timber, plywood, steel, precast concrete or fiberglass used separately or in combination. Steel 

Writing a Message
  • Please Enter your Subject.
  • Please enter Your valid email address.
Your inquiry content must be between 20 to 5000 characters..